Super accuracy 3D measurement

The STRATO Apex machine range is the boost you need to increase the quality of your products.

Guarantees a maximum permissible error of

MPEE=(0,7 + 2,5L/1000) µm


It allows the quality assurance of your parts accurately, flexibly and at high speed


Ideal automatic 3D measurement solution: STRATO APEX

Manufactured products are continuously improving in terms of longer life and lower energy consumption, which is often achieved through the application of tighter tolerances.

It allows you to verify the dimension of your parts in a super precise way.

  • Its redesigned machine structure, more rigid and with a new temperature compensation technology guarantees high speed and accuracy in measurements.
  • It uses a digital servo system that processes all position, speed and energy controls as digital signals.
  • An ultra-high precision crystallized glass scale which has practically no thermal expansion (coefficient of linear expansion 0.01 × 10-6/ °C) is combined with a high-performance reflective linear encoder with resolution of 2/100 μm to create the ultra-high accuracy measurement unit installed on each axis of STRATO Apex.
  • Includes an anti-vibration base as standard accessory. The vibration damping unit not only prevents the ground's vibrations from reaching the main unit, but also has a function that uses a sensor to detect changes in the load caused by the movements of the individual axes and the placement of a part, and quickly restores the main unit to horizontal orientation.

It allows you to verify the dimension of your parts at high speed. The CRYSTA-Apex S is equipped with a brand-new controller, the UC-400. The UC-400 allows high speed measurements and movements with impressive accuracies.

It offers you flexibility. It can be equipped with almost any kind of probe, such as:

  • Touch-trigger probes
  • Scanning probes
  • Laser scanners like Mitutoyo’s SurfaceMeasure
  • Vision probe QVP
  • Surface Roughness SURFTEST Probe

All probe configurations can be changed automatically within a measurement cycle. There are many kinds of probe changer available to meet the requirements of your application.


Related Products and Services

With this system you can use different softwares depending on your needs and uses. We will always advise you about the most appropriate complement for your company if you wish. Do not hesitate to ask us.

Related Products and Services

With this system you can use different softwares depending on your needs and uses. We will always advise you about the most appropriate complement for your company if you wish. Do not hesitate to ask us.


STRATO Apex has been designed for high precision inspection of parts of the automotive, aeronautical, health, capital equipment, machine tool, consumer ... etc sectors. The equipment is suitable for inspection of machined parts, stamping, plastic / aluminum injection, turbine blades, gears, molds and dies ... etc.

From 500mm to 2.000mm







Measuring probes

You will have a versatile and flexible system, which you can incorporate the following probes.


Tactile scanning probes such as SP25M or SP80 for fast measurement with high point density


High precision, touch-trigger probes with a tip size down to 0.3 mm for probing the smallest features


Vision systems for fast 2D measurement


Laser scanning probes for inspection and reverse engineering tasks


Surface roughness SURFTEST probe


Automatic changing racks to maximize machine efficiency

Custom solution

Our engineering department can customize and integrate the STRATO Apex coordinate measuring machine according to your requirements. Tell us what your challenge is and Sariki will advise you to identify which is the best solution for your specific case.



You can incorporate manual, semi-automatic and automatic loading systems into the equipment



We identify the cabin system that best suits your application



We guarantee 100% traceability of the process by integrating the CMM data with your MES/ERP system



We have experienced staff in programming and measurement for the realization and implementation of measurement part-programs



If you are looking for a turnkey project you can trust on us. We work with you from the conception of the idea and definition of project conditions, prior acceptance, installation in your company, user training and technical assistance and support throughout the life of the project.

We face integration projects from a holistic view of inspection guidelines and are committed to comply hybridization technologies. We can develop an inspection solution that combines different technologies: three-dimensional machine, roughness, vision, etc.

Technical specifications

Measuring range

X = from 500mm to 1.600mm
Y = from 700mm to 3.000mm
Z = from 400mm to 1.600mm


(0,7 + 2,5L/1000) µm



Driving speed

Up to 606mm/s

Driving acceleration

Up to 2.598 mm/s2

Temperature range

From 18ºC to 22ºC

Workpiece weight

From 180kg to 4.000 Kg.

Do you need more info?