100% in line measurement
We propose an integral solution for 100% inspection in the line of welded and cast components, including side beams, front end modules (FEC, GOR), hatches, axle components, underbody modules and even entire ladder frames.
Sariki is MAPVISION's official distributor for Spain and Portugal
Technology to measure 100% in line
You run a complex production process with inherent instability – yet you have a requirement for 100% delivery quality. To run SPC, your processes need to be extensively adjusted to meet the standards of your customer. However, SPC still provides you with limited production data after a significant time delay. Your production quality might look perfect, but it isn’t.
The access to immediately available, extensive and reliable measurement data will change this
We propose you a new technology, completely digital (without inaccuracies or mechanical failures), multi-camera and able to measure all the characteristics of all the parts in the line within the cycle time.
We are able to measure hundreds of 3D points (x, y, z) in less than 30 seconds and at the same time we perform visual inspection automatically to detect the presence / absence of elements (weldable nuts, weldable bolts, etc ...)
Each measurement point is observed with several cameras. This allows the system to guarantee the accuracy of each measurement by verifying the homogeneity of the images. In addition, we normally guarantee +/- 0.02mm with real production parts.
Get useful data to improve the quality of the geometry from day one of the preproduction
Measure each feature of each part
Use the measurement images to clearly identify the defects
Perform a 100% automatic final inspection
Make adjustments whenever you need it
Control and optimize your process effectively
Increase the quality of production
Solve problems in real time with a true knowledge of where the origin is
Integral project adapted to your needs
We offer an integral solution, adapted to your needs. The experience tells us that the collaboration with the client is the basis of success in this type of projects and that is the reason why we work jointly from the beginning, to identify which are the principal requirements and suggest the best solution.
We accompany you throughout the life of the project: project definition, installation, training, programming, user support and technical assistance. Sariki is made up of 60 highly specialized people with more than 35 years of experience in the metrology sector.
We accompany you throughout the project life
Get to know our metrology solutions for 100% in line inspection
For compact chassis and body transmission components (trailing arms, side beams and axle components)
For medium-sized chassis and body components, such as cross car beams, subframes, axles, and more
For car chassis and complete assemblies, such as car bodies and underbodies
Gestamp Group performs the control process of cross car beams and subframes throughout the world with this technology (United Kingdom, Germany, USA, China, Hungary, Spain and Czech Republic). It has 50 facilities to control the process in its production system.