Mitutoyo MISTAR
In process compact 3D measurement
The innovative solution for your shop floor measuring tasks.
Guarantees a maximum permissible error of
MPEE=(2.2+3L/1000)μm from 18ºc to 22ºC
*Ask for other temperature ranges
Speed, reliability and universality for your production control
Ideal in process 3D measurement solution: MISTAR
Designed for the shop floor. The MiSTAR 3d measuring machine guarantees high speed and accurate measurements even in severe machining sites without the need to create a special environment in the production area. It offers a guarantee of precision under a wide range of temperatures from 10°C to 40°C and requires only a 100 V AC power supply. The flexibility in its installation and the saving of space have reduced the area of installation to approximately 70 percent of the CMM of conventional bridge type.
Automatable. Mistar 555 uses an open frame design (570 x 500 x 500mm) with an x-axis cantilever type allowing users to easily locate a part for measurement from three directions: the front, back and right side.
Take measurements at high speed. Maximum travel speed 606mm/s. Acceleration 2695 mm/s
Measuring range up to 500mm.
Related Products and Services
With this system you can use different softwares depending on your needs and uses. We will always advise you about the most appropriate complement for your company if you wish. Do not hesitate to ask us.
Applications
MiSTAR has been designed for high precision inspection of the automotive, aeronautical, health, capital equipment, machine tool, consumer ... etc parts directly in production. The equipment is suitable for inspection of machined parts, stamping, plastic / aluminum injection, turbine blades, gears, molds and dies ... up to 500mm.
Measuring probes
You will have a versatile and flexible system, which you can incorporate the following probes.
TP 200
SP25M
Custom solutions
Our engineering department can customize and integrate the MiSTAR 555 coordinate measuring machine according to your requirements. Tell us what your challenge is and Sariki will advise you to identify which is the best solution for your specific case.
LOADING SYSTEM
You can incorporate manual, semi-automatic and automatic loading systems into the equipment
CABIN SYSTEM
We identify the cabin system that best suits your application
INTERACTION WITH PRODUCTION MANAGEMENT SYSTEMS
We guarantee 100% traceability of the process by integrating the CMM data with your MES/ERP system
CUSTOM PROGRAMMING
We have experienced staff in programming and measurement for the realization and implementation of measurement part-programs
TURNKEY PROJECT
If you are looking for a turnkey project you can trust on us. We work with you from the conception of the idea and definition of project conditions, prior acceptance, installation in your company, user training and technical assistance and support throughout the life of the project.
We face integration projects from a holistic view of inspection guidelines and are committed to comply hybridization technologies. We are able to develop an inspection solution that combines different technologies: three-dimensional machine, roughness, vision, etc.
Technical specifications
1 MODEL AVAILABLE
Measurement range
X 570mm
Y 500mm
Z 500mm
Accuracy
(2.2 + 3L/1000)µm
from 18ºc to 22ºC
Resolution
0,0001mm
Driving speed
Up to 606mm/s
Driving aceleration
Up to 2.695 mm/s2
Temperature range
From 10ºC to 40ºC
Machine mass
655 Kg.
